OPL-M4040
OPL-M401
OPL-M40 Flash bulb, 40 w/s
2
1
OPL-SA02 Socket with umbrella mount
2
1
OPL-KT62205 Light stand
2
1
OPL-SM46 Umbrella
2
1
OPL-1028 Carry case
1
x
Introduction
Congratulations and
thank you for choosing the Opus OPL-M40 monolight.
The OPL-M40 is a simple to use 40 w/s self contained flash unit.
In order to ensure safe operation and to obtain peak performance from your Opus
OPL-M40 flash bulb, please take a few moments to familiarize yourself with this user
guide.
Please make sure that you fully understand the operating instructions and features
of your new monolight before using it.
Thank you
www.OpusProPhoto.com
Have some feedback? Kindly contact us at [email protected]
Handling Precautions
* Turn off the power and unplug the power cord if the flash will not be used for a few days.
* For peak performance and longer life, the unit should be fired several times every month.
* Do not use the unit if it has been in contact with moisture or flammable vapour and / or
flammable material.
* Do not use the flash if it appears to be damaged.
* Never attempt to service the unit yourself. Severe shock and / or burns could result.
* Only certified technicians are authorized to service this unit.
* Before plugging in the unit, check that all the switches are in the “OFF” position.
Using the OPL-M40
The OPL-M40 can be screwed into any standard AC light socket. It can also be used with the
Opus OPL-SA02 light socket (see Available Accessories).
There are several ways to trigger the Opus OPL-M40 monolight
Sync Socket:
The sync socket is a standard
⅛
” jack and is used for connecting the OPL-M40 to a camera
with the sync cord. Please refer to your camera’s instruction manual for sync cord operation.
Photocell:
The OPL-M40 has a built-in photocell, enabling the unit to be triggered by another flash
source.
Flash Test Fire Button:
The flash test fire button manually triggers the flash without using a camera. This is useful for
testing the flash and checking exposures.
Kit Contents
Control Panel Guide
Model
OPL-M40
Flash Voltage
40w/s
GN (ISO 100) 3M
42
Recycle Time
4 seconds
Flash Triggering
Photo Cell, Sync Cord, Test Button
Due to our policy of constant product improvement, we reserve the right to change equip-
ment specifications and operating procedures without further notice.
Specifications
Full charge
indicator light
Power light
Sync socket
Photocell
OPL-M401
OPL-M4040
