User’s guide CS 2418 CD
Health & Safety precautions
•
Before using, the equipment please read the Health & Safety precautions, manufacturers’ recommendations and
the operating manual.
•
The operating manual should be available at all times for the operator to read.
•
The equipment can only be used in accordance with the specifications in the user guide/manual.
•
= should be installed on a sturdy and level surface near a 220 to 240 Volts AC 50 Hz. socket.
•
= the socket should be earthed in accordance with electrical regulations.
•
= must be protected against moisture and dust.
•
Do not put the equipment near heating or ventilation units.
•
The equipment must not be used in or near a room with inflammable liquids or gases.
•
Do not use the equipment near aerosols with, oil or grease made from petroleum or inflammable substances.
•
Do not use compressed air from an aerosol for clearing the shredder it could have inflammable gases.
•
The power supply cable should be protected against being damaged and not be used to pull the equipment or to
remove the plug from the power socket.
•
Unplug the equipment from the power socket when removing the cover or cleaning the inside.
•
The equipment should be KEPT AWAY and out of reach of children and animal’s.
•
Danger! Equipment contains rotary elements. KEEP AWAY from, long hair, loose jewellery, ties and other loose
pieces of clothing as they can become entangled in the cutting heads.
•
Be careful when feeding material into the slots.
•
When the motor overheats, it will turn off without a signal, turn off the main switch of the shredder immediately and wait
for it to cool down!
•
Do not put any heavy objects on the device!
•
When any malfunction occurs, check that the equipment is being used correctly and then contact the dealer or
service point.
•
The equipment must not be put or kept outside and should be operated in a room temperatures higher than +8°C.
•
The equipment should be operated in accordance with the general Health & Safety rules.
•
Any repairs must be carried out by authorised staff during the guarantee / warranty period.
•
After using the shredder, it must be turned off by the main switch on the equipment or by unplugging it from the
power socket.
Recommendations and requirements
•
The equipment was designed for shredding paper, CD and credit cards only. Do not shred other materials
•
During longer none operation, the mains switch should be turned “OFF’ and unplugged
•
Empty the shredded waste from the bin frequently
•
Before shredding, you must remove paper clips from the documents
•
The shredder can only be operated with the original paper bin supplied
•
To ensure long and faultless utilisation of the machine do not shred more than 18 sheets of 80g/m². Do not shred
computer printout paper, PVC foil, coated paper, card or cardboard – it can blunt the blades and cause damage to
the cutting mechanism
•
The shredder is able to deal with light staples and paper clips
NOTE! Not compliance with the recommendations above can result with,
the guarantee/warranty being made void.