ST-DUO2 | Manuel d’installation et d’utilisation | Installation and user manual |
22
6. Use
The ST-DUO2 can be used in different ways as
described below:
6.1 Meeting
For a conversation around a table place the OP-
10T transmitter in the center of the board. The
integrated microphone will capture the voices
of people placed 1 m from the box. For better
sound capture it is possible to use a wired mi-
crophone putted on the table (option).
6.2 Conversation (example: restaurant)
Place the OP-10T transmitter around the other
person's neck or waistband and plug in the lapel
microphone provided in the kit on the OP-10T.
6.3 Event (course, lecture, etc)
Place the OP-10T transmitter near the speaker
or speakers (example on the teacher's desk) or
give the transmitter OP-10T with a lapel micro-
phone so that the person installs it at the begin-
ning of the event.
6.4 Connected to TV
Thanks to the cord provided in the pack, con-
nect the OP-10T to the audio output of your te-
levision. For better listening quality, use a TO-
Slink converter that will allow you to be con-
nected to the digital output of your TV. In many
cases it will also not cut the sound of the spea-
kers.
6.5 On the move
Hold the OP-10T transmitter on the microphone
side and extend it to the other party to pick up
his voice (example: contact a store salesman).
Note:
It is possible to use multiple OP-
10R receivers with an OP-10T trans-
mitter.
Summary of Contents for ST-DUO2
