-22-
5.1.2.2
External Power Supply
Power connector is used to power camera when using an external power supply instead of power over
CoaXPress feature (PoCXP).
The connector is labelled “P” for CP80 and “Pwr” for CP90.
Optronis Camera accessory “Power supply” is recommended when using an external power supply.
Alternatively, your power supply must respect bellow characteristics:
CP80 Series
CP90 Series
Connector info:
Camera (P) connector type:
•
Lemo EGG.0B.303CLL
Cable Connector:
•
Lemo FGG0B303.CLAD56Z
Connector info:
Camera (Pwr.) connector type:
•
Hirose HR10A-7R-4S
Cable Connector:
•
Hirose HR10A-7R-4P
Connector View:
Figure 13: CP80 Power Connector
Connector View:
Figure 14: CP90 Power Connector
Connector Pinout:
Connector Pinout:
Pin 1: VCC
+/-5% (Ripple < 200mV)
Inrush Current ~0,6A
Pin 1: VCC
+/-5% (Ripple < 200mV)
Inrush Current ~0,6A
Pin 2: GND
Power Ground
Pin 2: VCC
Pin 3: Reserved
Pin 3: GND
Power Ground
Pin 4: GND
5.1.3
CoaXPress Connectors
CP80 Series
CP90 Series
Connector info:
4 x 75 Ω BNC connector
.
Compliant with IEC 61169-8 annex A, as required by
CoaXPress specification.
Connector info:
4 x 75 Ω 1.0 / 2.3 DIN connector
Compliant with IEC 61169-29 standard, as required
by CoaXPress specification.
Remark:
Connectors are labelled from 1 to 4
Remark:
Connectors are labelled from 1 to 4
