-25-
External Power Supply
Power connector is used to power camera when using an external power supply instead of power over
CoaXPress feature (PoCXP).
The connector is labelled “Pwr” for CP70.
Optronis Camera
accessory “Power supply” is recommended when using an external power supply.
Alternatively, your power supply must respect bellow characteristics:
CP70 Series
Connector info:
Camera (P) connector type:
•
Hirose HR10A-7R-4S
Cable Connector:
•
Hirose HR10A-7P-4P
Connector View:
Figure 12: CP70 Power Connector
Connector Pinout:
Pin 1, 2: VCC
+/-5% (Ripple < 200mV)
Inrush Current ~0,6A
Pin 3, 4: GND
Power Ground
5.1.3
CoaXPress Connectors
CP70 Series
Connector info:
4 x 75 Ω
1.0/2.3 DIN connector.
Compliant with IEC 61169-29, as required by
CoaXPress specification.
Remark:
Connectors are labelled from 1 to 4
