CamPerformCP70-1-M/C-1000
Ref. 1875-SU-01-F
Page 27
Camera firmware update
Camera firmware update is available through the USB programming cable and
the CXP_Flash_Consumer software (located in the CXPFlash_Setup folder)
delivered with the camera.
Please go through the following steps :
1) Switch OFF camera
2) Connect USB cable to PC and camera Aux. input.
3) Install USB driver on PC if it is not already done.
To install USB driver, launch USB_Setup.exe (located in the CXPFlash_Setup
folder) and then Reboot PC.
4) Switch ON camera
5) Launch CXP_Flash_Consumer.exe
Click on "Upload rbf" and select the file cxp1xxx.rbf.
