Edition of
FSU201.411
07.08.2012
Version 1.2
Page 4 of 10
FSU201
1 Introduction
The Flat Screen Unit FSU201 serves as replacement for OPTRONIC CRT Monitors. OPTRONIC AG
delivers the FSU201 pre-configured for your application. Hence, the FSU201 simply must be built in
and connected. It may be that the image shown on the flat screen is not fully satisfying. In this case, all
necessary adjustments can be easily done by use of buttons on the back side of the device. The con-
figuration process is easily operated by use of an on screen menu.
2 Device Assembly
The device consists of a L-shaped plate, whereon the TFT screen, the controller board, the backlight
converter, and the power supply are mounted (refer to Illustration 1 and Illustration 2).
The power supply, a 9-pin connector for connecting the video signal, as well as three buttons are
mounted on the back side of the device (see Illustration 1).
Illustration 1: Device back view
Illustration 2: Device front view
