optris 05M Operator'S Manual Download

Page: 62 / 92

6.1 Installation and initial start-up

•

All drivers are booted via Windows OS automatically. A driver installation is not necessary.

•

By default the program starts automatically in the installed language.

1. Insert the included USB stick into the according port on your computer.

2. Please start

Setup.exe

. Follow the instructions of the wizard until the installation is finished.

The installation wizard places a launch icon on the desktop and in the start menu:

Start\Programs\Optris GmbH\PIX Connect

3. To connect the camera to the PC, plug the USB cable to the camera first. Afterwards connect it with

the PC (to disconnect the camera and the computer remove the USB cable from the computer first
and then disconnect it from the camera).

4. Start the software.

At the initial start the software asks for the calibrations files which are available via internet or on the USB
stick.

5. Install the calibration files at first start of the software.

Summary of Contents for 05M





























































































Search results

Summary of Contents for 05M

Reviews:

Related manuals for 05M

Brands by name

Popular brands

optris 05M, Operator'S Manual

Search results

Summary of Contents for 05M

Reviews:

Related manuals for 05M

Brands by name

Popular brands