background image

IMPORTANT

This respirator reduces the exposures to airborne particles. 
All wearer must read and understand this 

User Instruction 

provided as a part of the product packaging. Follow all local 
regulations. A written respiratory protection program must 
be implemented in accordance of the requirements of OSHA 
1910.134, including training, fit testing and medical evaluation.
Keep this 

User Instruction

 for future reference. Please note: This 

mask is for single use and cannot be reused.

Use For

•  Particles such as those from grinding, sanding, sweeping, 

sawing, bagging, or processing minerals, coal, iron ore, 
flour, metal, wood, pollen and other solid particles. 

•  Liquid or non-oil based droplets from sprays that do not 

also emit oil aerosols or vapors. 

•  Solid particulates and liquid mists in concentracions 

not exceeding 10x PEL/OEL. Follow all applicable local 
regulations. 

For additional and latest information visit the webpage www.
optrel.com. Always follow 

User Instruction

 and use in indicated 

manner.

Do Not Use For

DO NOT

 use for gases, vapors, oil aerosols, absestos, arsenic, 

cadmium, lead, 4,4-methylene dianiline (MDA) or abrasive 
blasting. 

DO NOT

 use for particulate concentrations exceeding 

10x the occupational exposure limit or applicable government 
regulastions, whichever is lower. 

DO NOT

 use in any manner 

not indicated in the 

User Instruction

. This respirator does not 

supply oxygen.

Biological Particles

The respirator reduces inhalation exposures to airborne 
biological particles (e.g. mold, 

Bacillus anthracis, Mycobacterium 

tuberculosis

, etc.) but cannot offer absolute protection from 

infections, illness or disease. OSHA and other government 
agencies have not established safe exposure limits for these 
contaminants.

Use Instructions

1

. The mask is intended for single use and cannot be reused.

2

. Store the respirator away from contaminated areas.

3

. Inspect respirator before use to ensure that it is in good 

operationg condition. Examine all the respirator parts for signs 
of damage including the two headbands, attachment points 

and nose clip. The respirator must be disposed immediately  
if parts are damaged or missing.The filtering facepiece must 
be inspected prior use: Make sure the breathing zone is free 
from any damage. Immediately replace respirator if damaged. 

4

. Failure to follow all instructions and limitations on the 

use of this respirator and/or failure to wear this respirator 
during all times of exposure can reduce respirator 
effectiveness and 

may result in sickness or death

5

. In the U.S., before occupational use of this respirator, a written 

respiratory protection program must be implemented meeting all 
the requirements of OSHA 29 CFR 1910.134, such as training, 
fit testing, medical evaulation, and applicable OSHA substances 
specific standars.  Follow all applicable local regulations.

6

. Leave a contaminated area immediately and contact 

supervisor if dizziness, irritation, or other distress occurs.

7

. Conduct a seal check before each use as specified in the 

Fitting  Instructions section. 

If you cannot achieve a proper 

seal or the mask does no longer tightly close, do not use 
the respirator

.

8

. Change the mask when it is saturated with humidity, 

particulates or breathing becomes difficult; or every 4 hours 
after continuous use, only change in a save environment.

9

. Dispose the used product in accordance with all applicable 

regulations.

Use Limitations

1

. This respirator does not supply oxygen. Do not use it in 

atmospheres containing less than 19.5% oxygen.

2

. Do not use respirator when concentrations of contaminants 

are immediately dangerous to life and health, are unknown or 
when concentrations exceed 10x the permissible exposure 
limit (PEL) or according to specific OSHA standards or 
applicable government regulations, whichever is lower.

3

. Do not alter, wash, abuse or misuse the respirator.

4

. The mask is intended for single use and cannot be reused.

5

. Do not use with beards or other facial hair or other 

conditions that prevent a good seal between the face and 
the sealing surface of the respirator.

6

. Respirators can help protect your lungs against certain 

airborne contaminants. They will not prevent entry through 
other routes such as the skin, which will require additional 
personal protective equipment (PPE).

7

. This respirator is designed for occupational/professional 

use by properly trained adults. This respirator is not designed 
to be used by children.

English

Reviews: