Optos P200TE, User Manual

Page: 33 / 374

Chapter 3 - How to...
For Chinese, Japanese, and Korean, the keyboard interfaces with the Microsoft IME to allow Asian character
input.
l
The IME uses the default configuration, which can be changed as desired in Windows.
l
Shortcuts or key combinations can be used within the IME, as long as the keys are present on the on-
screen keyboard. However, alphabetic letter keys might not work in these situations.
l
For Japanese:
l
The Space bar is used for conversion and re-conversion.
l
F6-F10 are used to quickly change a converted phrase to a specific character type.
l
If you need to select more than one character for reconversion, hit Shift + arrow key for each
character.
3.1.3.3 Using the hand control
The hand control is used to adjust the scan head XYZ alignment. When capturing OCT scans the hand control
can also be used to adjust the scan.
FIGURE 3: Hand control
TABLE 3: List of hand control buttons
Control Description XYZ mode Description OCT mode
Toggle between XYZ and OCT adjustment
modes when capturing OCT scans. Toggle between XYZ and OCT adjustment
modes.
Lower chin rest.
Move the position of the OCT scan towards
the choroid.
Raise chin rest.
Move the position of the OCT scan towards
the vitreous.
Fine adjustment left, right, up and down.
Move the scan within the frame and center
the scan on the desired area.
Fine adjustment to move the alignment system
further from the patient. Move the focus within the OCT scan
towards the choroid.
Fine adjustment to move the alignment system
closer to the patient. Move the focus within the OCT scan
towards the vitreous.
Press the top button on the hand control to
capture an image. Press the top button on the hand control to
capture a scan.
Part Number: G108707/8GME Page 33 of 75
Copyright 2018, Optos plc. All rights reserved. English