Optoma ZU920TST, User Manual

Page: 54 / 89

English 54
USING THE PROJECTOR
Input Settings menu
Learn how to configure the projector input settings.
Submenus
‡ Auto Source
‡ Quick Resync
‡ Active Inputs
‡ Latency Adjustment
‡ VGA
‡ HDMI
Auto Source
When Auto Source is enabled, the projector automatically detects and selects the input signal. Once an input
source is selected, press the Input button on the remote control or keypad to switch to other available sources.
When the function is disabled, pressing Input will bring up the Active Inputs submenu.
Quick Resync
Set the quick resync feature.
Active Inputs
Select an input signal from the source list. The available input sources are VGA, HDMI1, HDMI2, and HDBaseT.
Latency Adjustment
Enable this feature to reduce response time.
VGA
Setup the VGA source by selecting the proper Phase and Resolution.
HDMI
Set the projector’s HDMI ports.
Output
Set the HDMI 1 or HDMI 2 port to output the signal.
HDMI 1 EDID/HDMI 2 EDID
When receiving a HDMI signal, set the projector’s EDID compatibility to display the signal correctly. Select 1.4
for the input devices with HDMI 1.4, or 2.0 for HDMI 2.0 devices.
Note: For a better 3D experience, it is recommended to choose HDMI 1.4.
Reset
Reset all the input settings to factory default values.