Optoma ZU920TST User Manual Download Page 63

Page: 63 / 89

English 63

USING THE PROJECTOR

HTTP

Control the projector with web browser. (Port: 80)
For more information, refer to “Using the web control panel” on page 64.

Reset

Reset the control functions to default factory values.

(Ethernet)

Projector

Note:

Crestron is a registered trademark of Crestron Electronics, Inc. of the United States.

Extron is a registered trademark of Extron Electronics, Inc. of the United States.

AMX is a registered trademark of AMX LLC of the United States.

PJLink applied for trademark and logo registration in Japan, the United States of America, and other

countries by JBMIA.

For more information about the various types of external devices which can be connected to the LAN

/ RJ45 port and remotely control the projector, as well as the supported commands for these external

devices, please contact the Support-Service directly.

Support OMSC and OMSL. For more information, please contact the Support-Service directly.

Baud Rate

Set the baud rate for Serial Port In and Serial Port Out. The available options are 1200, 2400, 4800, 9600, 19200,
38400, 57600, and 115200 (default).

Reset

Reset all network settings to default factory values.

Summary of Contents for ZU920TST


























































































Search results

Summary of Contents for ZU920TST

Reviews:

Related manuals for ZU920TST

Brands by name

Popular brands

Optoma ZU920TST, User Manual

Search results

Summary of Contents for ZU920TST

Reviews:

Related manuals for ZU920TST

Brands by name

Popular brands