36 English
USER CONTROLS
3D
3D
Auto: When a HDMI 1.4a 3D timing identification signal is detected, the 3D image is selected automatically.
Choose “On” to enable 3D function.
•
Choose"Auto" to detected 3D signal automatically.
•
3D Invert
If you see a discrete or overlapping image while wearing DLP 3D glasses, you may need to execute “Invert” to get
best match of left/right image sequence to get the correct image.
3D Format
Use this feature to select the 3D format. Options are: “Frame Packing”, “Side-by-Side (Half)”, “Top and Bottom”,
“Frame Sequential”.
1080p@24
Use this feature to select 96 or 144Hz refresh rate as using 3D glasses in the1080p @ 24 frame packing.
Summary of Contents for ZH510Te
Page 1: ...User s Manual DLP Projector ...
Page 49: ...www optoma com ...
