Optoma ZH507, User Manual

Page: 35 / 68

English 35
USING THE PROJECTOR
Brightness Mode
Adjust the brightness mode settings.
‡ DynamicBlack : Use to automatically adjust the picture brightness in order to give optimum contrast
performance.
‡ Eco. : Choose “Eco.” to dim the projector laser diode which will lower power consumption and extend
the laser diode life.
‡ Constant Power : Choose the power percentage for brightness mode.
‡ Constant Luminance : Constant Luminance varies the strength of LD luminance such that the
brightness maintains consistent with time.
Reset
Return the factory default settings for color settings.
Display enhanced gaming menu
Enhanced Gaming
Enable this feature to reduce response times (input latency) during gaming to 8.2ms (1080p@120Hz). All geometry
settings (example: Keystone, Four Corners) will be disabled when Enhanced Gaming Mode is enabled. For more
information is below.
Note:
‡
The input lag by signals is described in the following table:
‡ The values in the table can vary slightly.
Source Timing
(HDMI1)
Enhanced
Gaming
Output Output Resolution Input Lag
1080p60 On 1080p60Hz 1080p 16.2ms
1080p120 On 1080p120Hz 1080p 8.2ms
4K60 On 1080p60Hz 1080p 16.8ms
1080p60 Off 1080p60Hz 1080p 49.5ms
1080p120 Off 1080p120Hz 1080p 24.8ms
4K60 Off 1080p60Hz 1080p 49.9ms
Source Timing
(HDMI2)
Enhanced
Gaming
Output Output Resolution Input Lag
1080p60 On 1080p60Hz 1080p 16.2ms
1080p120 On 1080p120Hz 1080p 8.2ms
1080p60 Off 1080p60Hz 1080p 49.5ms
1080p120 Off 1080p120Hz 1080p 24.8ms
‡
Please note that if “Enhanced Gaming” mode is enabled, the 3D, Aspect Ratio, Edge Mask, Digital
Zoom, Image Shift, and Geometric Correction functions are disabled automatically. These functions
and settings will be restored when “Enhanced Gaming Mode” is disabled.