English
46
UsInG THE PRoJECToR
Projector address
Set the projector address. The projector will respond to IR remotes set either at the same address as the projector
or to IR remotes set to address 0.
How to use web browser to control your projector
1.
Make sure your PC is in the area with the projector.
2.
Open the web browser in your PC and type in the projector’s IP address (“SETUP: Communications >
LAN > IP Address”).
note:
The steps in this section is based on Windows 7 operating system.
making a direct connection from your computer to the projector*
1.
Turn “Off” the DHCP option on the projector.
2.
Configure the IP address, Subnet Mask, and Gateway on projector. Refer to “Communications menu”
on page 41.
3.
Open
Network and Sharing Center
page on your PC, and assign the identical network parameters to
your PC as set on projector. Click “OK” to save the parameters.
4.
Open the web browser on your PC and type in to the URL field the IP address, assigned in step 3.
Then press “Enter”.
Summary of Contents for WU1500
Page 1: ...User manual DLP Projector...
Page 77: ...www optoma com...
