English 35
USING THE PROJECTOR
Power Mode (Standby)
Set the power mode setting.
Activee:
Choose “Active” to return to normal standby.
Ecoe:
Choose “Eco.” to save power dissipation further < 0.5W.
Setup security menu
Security
Enable this function to prompt for a password before using the projector.
One:
Choose “On” to use security verification when the turning on the projector.
Offe:
Choose “Off” to be able to switch on the projector without password verification.
Security Timer
Can be select the time (Month/Day/Hour) function to set the number of hours the projector can be used. Once this
time has elapsed you will be requested to enter your password again.
Change Password
Use to set or modify the password that is prompted when turning the projector on.
Setup test pattern menu
Test Pattern
Select the test pattern from green grid, magenta grid, white grid, white, or disable this function (off).
Setup remote settings menu
IR Function
Set the IR function setting.
One:
Choose “On”, the projector can be operated by the remote control from top and front IR receivers.
Fronte:
Choose “Front”, the projector can be operated by the remote control from the front IR receiver.
Reare:
Choose “Rear”, the projector can be operated by the remote control from the rear IR receiver.
Offe:
Choose “Off”, the projector can’t be operated by the remote control. By selecting “Off”, you will be
able to use the Keypad keys.
User1/ User2/ User3
Assign the default function for User1, User2, or User3 between Test Pattern, LAN, CMS, Color Temp, Gamma, Auto
Source, Projection, Lamp Settings, Zoom, MHL, Dynamic Range, Dynamic Black, or PureEngine.
Setup projector ID menu
Projector ID
ID definition can be set up by menu (range 0-99), and allow user control an individual projector by using RS232 command.
