How to Use the Digital Signage Processor
29
Playing media files using USB memory
By default, if Slide Show mode is enabled, the Digital Signage
Processor first reads the USB memory drive for media content
when it boots up.
1. Insert the USB memory drive in the USB slot.
2. Turn on the Digital Signage Processor.
The content of your memory drive is displayed on the screen.
Please refer to
“ Slide Show” on page 19
for details on how to enable
Slide Show mode.
Playing media files on the SD card
1. Insert an SD card into the SD card slot.
2. Turn on the Digital Signage Processor. The device boots
up.
3. If there is a schedule program in the SD card, the Digital
Signage Processor plays the program content. Otherwise,
the screen displays the message, “There is no schedule
program at current time”.
Please refer to the InfoSAP Creator manual for more information about playing
content files on the SD card.
Updating Content
Your Digital Signage Processor supports four methods for
content update:
• USB Memory Update
• Manual rewrite of SD card by PC
• Remote rewrite through LAN
• Remote rewrite through WAN
Note
Note
