background image

14 

 

Disclaimer 

Please be advised, the BE Live2 is equipped with the latest technology however 

functionality may vary by device. 
 

 

FCC STATEMENT 

1.  This  device  complies  with  Part  15  of  the  FCC  Rules.  Operation  is  subject  to  the 
following two conditions: 
(1) This device may not cause harmful interference. 
(2)  This  device  must  accept  any  interference  received,  including  interference  that 
may cause undesired operation. 

 

 
 
NOTE:  This  equipment  has  been  tested  and  found  to  comply  with  the  limits  for  a 
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed 
to  provide  reasonable  protection  against  harmful  interference  in  a  residential 
installation. 
This  equipment  generates  uses  and  can  radiate  radio  frequency  energy  and,  if  not 
installed and 
used  in  accordance  with  the  instructions,  may  cause  harmful  interference  to  radio 
communications. However, there is no guarantee that interference will not occur in a 
particular installation. If this equipment does cause harmful interference to radio or 
television reception, which can be determined by turning the equipment off and on, 
the  user  is  encouraged  to  try  to  correct  the  interference  by  one  or  more  of  the 
following measures: 

 

  Reorient or relocate the receiving antenna. 

 

  Increase the separation between the equipment and receiver. 

 

  Connect  the  equipment  into  an  outlet  on  a  circuit  different  from  that  to  which 

the receiver is connected. 

 

  Consult the dealer or an experienced radio/TV technician for help. 

 
 
RF warning statement: 

 

 

 

 

 

 

 

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.

Note: The grantee is not responsible for any changes or modifications not expressly approved by the party 
responsible for compliance. Such modifications could void the user’s authority to operate the equipment.

Summary of Contents for NuForce BE Live2

















Reviews: