background image

12 

 

Federal Communication Commission Interference 

Statement 

 
This equipment has been tested and found to comply with the limits for a Class B 

digital device, pursuant to two different Part 15 rules sections of the FCC. These 

limits are designed to provide reasonable protection against harmful interference in 

a residential installation. 
This equipment generates, uses and can radiate radio frequency energy and, if not 

installed and used in accordance with the instructions, may cause harmful 

interference to radio communications. However, there is no guarantee that 

interference will not occur in a particular installation. If this equipment does cause 

harmful interference to radio or television reception, which can be determined by 

turning the equipment off and on, the user is encouraged to try to correct the 

interference by one of the following measures: 

. Reorient or relocate the receiving antenna. 

. Increase the separation between the equipment and receiver. 

. Connect the equipment into an outlet on a circuit different from that to which the 

receiver is connected. 

. Consult the dealer or an experienced radio/TV technician for help. 

 

FCC Caution

: To assure continued compliance, any changes or modifications not 

expressly approved by the party responsible for compliance could void the user's 

authority to operate this equipment. (Example - use only shielded interface cables 

when connecting to computer or peripheral devices). 

 

FCC Radiation Exposure Statement 

 

This equipment complies with FCC RF radiation exposure limits set forth for an 

uncontrolled environment. This equipment should be installed and operated with a 

minimum distance of 0.5 centimeters (.20 of an Inch) between the radiator and your 

body. 

 

This transmitter must not be co-located or operating in conjunction with any other 

antenna or transmitter. 

 

The antennas used for this transmitter must be installed to provide a separation 

distance of at least 0.5 centimeters (.20 of an Inch) from all persons and must not be 

co-located or operating in conjunction with any other antenna or transmitter. 

 

 
This device complies with two different Part 15 rules sections of the FCC. Operation is 

subject to the following two conditions: 

(1)

 

This device may not cause harmful interference, and (2) This device must accept 

any interference received, including interference that may cause undesired 

operation. 

Summary of Contents for NuForce BE Free8

















Reviews: