Optoma ML750ST, User Manual

Page: 29 / 57

29
English
Setup
The Setup menu allows you to choose the default OSD language, modify boot-up
source, set sleep timer, and other options.
Setup
English Language
Boot-Up Source
Direct Power On
Select Exit Enter
Sleep Timer
Advanced
Reset
Ver.
Auto
Off
Auto
Language
:
Set the language for the OSD. Options are: English, Germany, French,
Italian, Spanish, Portuguese, Polish, Dutch, Russian, Swedish, Greek,
中文 (繁), 中
文 (简)
, Janpanese, Korean, and Turkish.
Boot-Up Source
:
Select the projector’s boot-up source. Options are: Auto , VGA ,
HDMI / MHL , and Media .
Note: If the Boot-Up Source is set to“Auto” then at each boot-up of the projector the input
source is always chosen the same as in previous session.
Direct Power On
:
Choose On to activate Direct Power mode. The projector will
automatically power on when AC power is supplied, without pressing the Power but-
ton on the projector control panel or on the remote control.
Sleep Timer
:
Set the countdown timer interval. The countdown timer will start, with or
without a signal being sent to the projector. The projector will automatically power off
when the countdown has finished. Options are:
Auto , Off , 30 min , 1 hour , 3 hours ,
8 hours , 12 hours .
Note:
If the Sleep Timer is set to“Auto” then the project will automatically power off after 15
minutes if no signal has been detected.