Optoma LV130, User Manual

Page: 11 / 23

English 11
USING THE PROJECTOR
Powering on / off the projector
Powering on
Note: Before powering on the projector for the first time, you need to fully charge the battery.
1. Attach the correct power plug that is supported in your region to the power adapter.
2. Connect one end of the power adapter to the DC IN connector on the projector.
3. Connect the other end of the power adapter to the electrical outlet. When connected, the LED indicator
will turn red and the battery starts charging.
Wait until the LED indicator will turn blue which means the battery is fully charged. More information
on LED colors, refer to page 20.
4. Connect the signal/source cable.
5. Long press (> 1s) the Power button on the rear panel of the projector.
Power Button
LED Indicator
The first time the projector is powered on, you will be prompted to select a preferred OSD language. Press the
tu
keys to select your preferred language.
L a n g u a g e
L a n g u a g e
L a n g u a g e
L a n g u a g e
E n g l i s h
Note:
‡ Short press (< 1s) the Power button to turn on or turn off the power bank while running on battery
mode (power adapter is unplugged).
‡ In active mode (the projector is powered on), the power output through the MHL connector and USB
connector simultaneously is not supported. The MHL connector has higher priority, meaning the power
output from the USB connector will be cut off.