Delta Elec. Inc.
HD86
Company Confidential Optoma___________________ Delta________________
69
2009/08/18
8. Projection Lamp
8-1. Projection Lamp
The projection lamp should be replaced when it burns out. It should only be replaced with a
certified replacement part, which you can order from your local dealer.
Important:
1. The lamp contains a certain amount of mercury and should be disposed according to local
ordinance regulations.
2. Avoid touching the glass surface of the new lamp: Doing so may shorten its operation life.
Warning:
Be sure to turn off and unplug the projector at least 30 minutes before replacing the lamp.
Failure to do so could result in a severe burn.
8-2. Replacing the Projection Lamp
The projector automatically detects the lamp life.
When the lamp life is nearing the end of use, you will receive a warning message.
When you see this message,
please contact your local reseller or service center to change the lamp as soon as possible.
Make sure the projector has been cooled down for at least 30 minutes before changing the
lamp.
