User Controls
Remote Control
Using the Remote Control
Power On
Turn on the projector.
Power Off
Turn off the projector.
Lamp Mode
Increase the brightness of the image.
Mode
Select the display mode from Cinema,
Bright, Photo, Reference, 3D, ISF Day, ISF
Night and User.
4:3
Scale the image to 4:3 aspect ratio.
16:9
Scale the image to 16:9 aspect ratio.
LBX
Enable the viewing of the letterboxed nonan-
amorphically enhanced movie at full screen
width. Part of the original image will be lost if
the image aspect ratio is less than 2.35:1.
Native
The input source will be displayed without
scaling.
Brightness
Adjust the brightness of the image.
Contrast
Control the degree of difference between the
lightest and darkest parts of the picture.
PureEngine
The PureEngine is a collection of advanced
image processing technologies that
enhances the quality of the displayed image.
3D Format
Press “3D Format” to switch between “Off”
and “SBS”, use up/down button to switch to
“Top and Bottom” or “Frame Sequential then
press “Enter” to confirm.
