Optoma HD27e Manual Download

Page: 29 / 54

English 29

USING THE PROJECTOR

Display menu

Display image settings menu

Display Mode (Video mode)

There are many factory presets optimized for various types of images.

Cinema

: Provides the best colors for watching movies.

Vivid

: In this mode, the color saturation and brightness are well-balanced. Choose this mode for

playing games.

Game

: Select this mode to increase the brightness and response time level for enjoying video games.

Reference

: Provides the most accurate natural looking colors close to Rec. 709, the standard for High

Definition TV(HDTV).

Bright

: Maximum brightness from PC input.

USER

: Memorize user’s settings.

: To experience the 3D effect, you need to have 3D glasses. Make sure your PC/portable device

has a 120 Hz signal output quad buffered graphics card and a 3D Player installed.

ISF Day

: Optimize the image with the ISF Day mode to be perfectly calibrated and high picture quality.

ISF Night

: Optimize the image with the ISF Night mode to be perfectly calibrated and high picture

quality.

ISF 3D

: Optimize the image with the ISF 3D mode to be perfectly calibrated and high picture quality.

Notee:

For access and calibration of ISF daytime and night viewing modes, please contact your local dealer.

Wall Color

Use this function to obtain an optimized screen image according to the wall color. Select between off, blackboard,

light yellow, light green, light blue, pink, and gray.

Brightness

Adjust the brightness of the image.

Contrast

The contrast controls the degree of difference between the lightest and darkest parts of the picture.

Sharpness

Adjust the sharpness of the image.

Color

Adjust a video image from black and white to fully saturated color.

Tint

Adjust the color balance of red and green.

Gamma

Set up gamma curve type. After the initial setup and fine tuning is completed, utilize the Gamma Adjustment steps

to optimize your image output.

Film

: For home theater.

Video

: For video or TV source.

Graphics

: For PC / Photo source.

Standard(2.2)

: For standardized setting.

1.8/ 2.0/ 2.4

: For specific PC / Photo source.

Summary of Contents for HD27e























































Search results

Summary of Contents for HD27e

Reviews:

Related manuals for HD27e

Brands by name

Popular brands

Optoma HD27e, Manual

Search results

Summary of Contents for HD27e

Reviews:

Related manuals for HD27e

Brands by name

Popular brands