Optoma HD27, User Manual

Page: 28 / 55

English 28
UsInG THE PRoJECToR
main
menu
sub menu sub menu 2 sub menu 3 sub menu 4 Values
Setup Reset
Reset OSD
Cancel [Default]
Yes
Reset to Default
Cancel [Default]
Yes
Information
Regulatory
Serial Number
Source
Resolution
00x00
Refresh Rate 0.00Hz
Display Mode
Lamp Hours
Bright 0 hr
Eco. 0 hr
Dynamic 0 hr
Eco+ 0 hr
Total
Filter Hours
Brightness
Mode
FW Version
System
MCU
notee:
The “Lamp Reset” in OSD will only reset both Lamp Hours in OSD and Lamp Hours in service mode. ‡
The Projection Hours in service mode will not be reset.
When you made the changes on the “IR Function”, “Projection”, or “Keypad Lock” function, a
‡
confirmation message will appear on the screen. Select “Yes” to save the settings.
Each display mode can be adjusted and saved the value.
‡
In 3D timing mode, the zoom/edge mask will be disabled to prevent from image break.
‡