Optoma GT1080e Manual Download Page 19

Page: 19 / 68

English

Installation

Contact.the.

nearest.service.

center.if.the.

projector displays

these symptoms.

See.pages.

65-66 for more

information.



Warning Indicator

When the warning indicators (see below) come on,

the projector will automatically shutdown:



“LAMP” LED indicator is lit red and if “On/Standby” indicator

flashes amber.



“TEMP” LED indicator is lit red and if “On/Standby”

indicator flashes amber. This indicates the projector has

overheated. Under normal conditions, the projector can be

switched back on.



“TEMP” LED indicator flashes red and if “On/Standby”

indicator flashes amber.

Unplug the power cord from the projector, wait for 30 seconds

and try again. If the warning indicator light up again, please

contact your nearest service center for assistance.

Summary of Contents for GT1080e





































































Search results

Summary of Contents for GT1080e

Reviews:

Related manuals for GT1080e

Brands by name

Popular brands

Optoma GT1080e, Manual

Search results

Summary of Contents for GT1080e

Reviews:

Related manuals for GT1080e

Brands by name

Popular brands