2
English
Usage Notice
The lightning flash with arrow head within an equilateral triangle is
intended.to.alert.the.user.to.the.presence.of.uninsulated.“dangerous.volt-
age” within the product’s enclosure that may be of sufficient magnitude to
constitute.a.risk.of.electric.shock.to.persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance (servic
-
ing) instructions in the literature accompanying the appliance.
WARNING:
TO.REDUCE.THE.RISK.OF.FIRE.OR.ELECTRIC.SHOCK,.DO.NOT.
EXPOSE.THIS.APPLIANCE.TO.RAIN.OR.MOISTURE..DANGEROUS.HIGH.
VOLTAGES.ARE.PRESENT.INSIDE.THE.ENCLOSURE..DO.NOT.OPEN.THE.
CABINET..REFER.SERVICING.TO.QUALIFIED.PERSONNEL.ONLY.
Class B emissions limits
This Class B digital apparatus meets all requirements of the Canadian Inter
-
ference-Causing Equipment Regulations.
Important Safety Instruction
1. Do not block any ventilation openings. To ensure reliable operation of the
projector and to protect from over heating, it is recommended to install the
projector in a location that does not block ventilation. As an example, do
not place the projector on a crowded coffee table, sofa, bed, etc. Do not
put.the.projector.in.an.enclosure.such.as.a.book.case.or.a.cabinet.that.
restricts air flow.
2. Do not use the projector near water or moisture. To reduce the risk of fire
and/or electric shock, do not expose the projector to rain or moisture.
3. Do not install near heat sources such as radiators, heaters, stoves or any
other apparatus such as amplifiers that emits heat.
4. Clean only with dry cloth.
5. Only use attachments/accessories specified by the manufacturer.
6. Do not use the unit if it has been physically damaged or abused. Physical
damage/abuse would be (but not limited to):
Unit.has.been.dropped.
Power supply cord or plug has been damaged.
Liquid has been spilled on to the projector.
Projector has been exposed to rain or moisture.
Something has fallen in the projector or something is loose inside.
Do not attempt to service the unit yourself. Opening or removing covers
may expose you to dangerous voltages or other hazards. Please call
Optoma before you send the unit for repair.
7. Do not let objects or liquids enter the projector. They may touch danger
-
ous voltage points and short out parts that could result in fire or electric
shock.
8. See projector enclosure for safety related markings.
9. The unit should only be repaired by appropriate service personnel.
-
-
-
-
-
Safety Information
