
Page 4 of 64
Important Safety Notice
CAUTION
ATTENTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR
▪
Always ensure that the unit is properly earthed and power connections correctly made.
▪
This equipment must be supplied from a power system providing a protective earth connection and having a
neutral connection, which can be reliably identified.
▪
The power outlet supplying power to the unit should be close to the unit and easily accessible.
▪
Ensure whole system power off before connect or disconnect the network cable.
▪
Do not handle the power supply plug with wet hands.
▪
Do not place the display on sloped or unstable surfaces, otherwise it may fall off or tip over.
▪
Do not place any objects on top of the display.
▪
No naked flame sources, such as lighted candles.
▪
To prevent electric shock , do not remove cover.
▪
No user serviceable parts inside. Refer servicing to qualified service personnel.
▪
Don’t
grab the four corners of display (after finishing assembling) when you want to move it from the floor, or
the display will become deformed and affect the alignment. You need to erect it up and move it.
▪
Don’t
grab any sheet metal of the display when you assemble the display, otherwise the sheet metal will
become deformed and affect the flatness .You can only catch the reinforcing rib.
Summary of Contents for FHDS130
