EP770
6-4
Confidential
No
Step
Procedure
Photo
6
Change
Cable to
Digital
- “Please change the Cable
to Digital” message is
shown on the screen.
- Connect Port P3 of fixture
to DVI Port of EP770 by
DVI
Cable.
- Click “OK”
7
DVI
Finished
When the EDID program is
completed, the message,
“OK”, will appear on the
screen.
8
Check
the whole
process
1. In the “Read Item”
Selections, choose the
Port that you use.
Ex: If you use the Analog
(Digital) Port, choose
“Analog(Digital)” in the
“Read Item”.
(Note: After clicking “Read” ,
if the code in the Serial Blank
is scrambled, please make a
check in “Trans”.)
2. Click on “Read” to read
EDID information.
3. The “EDID Informations”
will show the result.
4. Click “Reset” to do the
next unit or “Exit” to close
the EDID program.
2.
4
