5-2
EP731
SERVICE MANUAL
Introduction Fundamental Principle Mechanical Construction Procedure of Disassembly Function of Boards
Specifications
Troubleshooting Function Test and Alignment Procedure Firmware Upgrading Procedure DDC Key-In Procedure Appendix
5-1
Lamp Specifications
Operating and Measurement Conditions
w
Ballast type
Test conditions stable at 150W with
OSRAM PT VIP 150 AC/100-240 H1 ballast
w
Rated lamp wattage
150 W
w
Burner position
0° to +10° (0° optical axis horizontal)
w
Burning position
horizontal
Temperature
w
Mo wire/Ni-wire weld
< 350°C
w
Lamp burner Mo foil
< 350°C
w
Bulb
900°C - 1000°C
Validation of max. permissible temperatures by reference thermocouple measurement based on a reference
lamp housing.
Typical Burner Characteristics (initial)
w
UV-output
UVA (315-400 nm) 8.75 W typical
UVB (280-315 nm) < 0.13 W
UVC (248-280 nm) < 0.01 W
w
UV-output through dichroic reflector
(248-400 nm) 2.6 W typical
w
Total visible flux
(400-780 nm) 37.5 W typical
w
IR
(780-2500 nm) 37.5 W typical
All manuals and user guides at all-guides.com
