English 57
USING THE PROJECTOR
Notee:
“Front” and “Top” cannot be selected in standby mode.
IR mode can be switched to “NVIDIA 3D Vision” once implemented and verified by NVIDIA.
Remote Code
Press to set Remote custom code and press “Enter” to change to the setting.
Exit
Choose “Exit” to exit the menu.
Options advanced menu
Exit
Off
Direct Power On
OPTIONS
Advanced
Signal Power On
Auto Power Off (min)
Sleep Timer (min)
Power Mode (Standby)
Active
Off
Direct Power On
Choose “On” to activate Direct Power mode. The projector will automatically power on when AC power is supplied,
without pressing the “ ” key on the projector Control Panel or on the remote control.
Signal Power On
Choose “On” to activate Signal Power mode. The projector will automatically power on when a signal is detected,
without pressing the “ ” key on the projector Control Panel or on the remote control
.
Auto Power Off (min)
Sets the countdown timer interval. The countdown timer will start, when there is no signal being sent to the
projector. The projector will automatically power off when the countdown has finished (in minutes).
Press the
to decrease the timer interval.
Press the
to increase the timer interval.
Notee:
The value of sleep timer will be reset to zero after the projector is powered off.
The projector will automatically power off when the countdown has finished.
Sleep Timer (min)
Sets the countdown timer interval. The countdown timer will start, with or without a signal being sent to the
projector. The projector will automatically power off when the countdown has finished (in minutes).
Press the
to decrease the timer interval.
Press the
to increase the timer interval.
Notee:
Summary of Contents for EH615
Page 1: ...User manual DLP Projector...
Page 95: ...www optoma com...
