2
5
Operation
Picture 1
Picture 2
1.Lowering the screen:
Using the pull down handle, lower
the screen with a gentle even action until desired height is reached.
The screen will stop when it reaches its maximum.
DO NOT A TTEMPT TO FORCE THE SCREEN LOWER THAN
THIS POINT.
The screen will retract slightly before lock-ing in place.
2.Raising the screen:
Using the handle, pull down the
screen a small way, then allow the screen to raise quickly.
Caution: Do not let go of the handle until the screen is fully retracted. Damage from retracting
too rapidly
can occur. Do not allow the dropper bar to hit
the screen case when retracting.
Take out all the parts from the packaging to ensure you have all necessary components.
There are three installation measures for this product, namely wall mount, ceiling mount and ceiling hang. The
installed distance can be changeable up to your needs via adjusting the slipper block, while the ideal position is the
mounting bracket is at its nearest point to the end cap, which can reduce unnecessary vibration or noise.
Installation
1. Mount the wall/ceiling brackets using the appropriate screws for your supporting material.
2. Ensure the brackets are horizontal and near the ends of the casing. Fasten to the wall or ceiling, not both.
( Figure 1) .
Figure 1
Wood wall installation
Wood ceiling installation
Concrete wall installation Concrete ceiling installation
Figure 2
Figure 3
Figure 4
Figure 5
Wall and ceiling installation:
Installation Steps
a) Wood supporting materials: Drill in the 5 x 40 screws through the appropriate holes in the
bracket
( Figure 2-3 ).
b) Concrete supporting materials: Install the
anchors and drill in the 5 x 40
( Figure 4-5).
screws into the appropriate
bracket holes.
