4
Identifying product versions
The UST lens kit is designed with two types of installation accessories in order to fit the different lens shift
modules (LSM) on the projectors. These instructions
contain installation steps for both types. Please check
the projector’s boresight to identify the version of the lens shift module.
Note:
Make sure the projector is turned off before checking the boresight.
•
Type 1 Lens Shift Module (LSM 1)
•
On LSM 1, the boresight plate is secured with three screws.
•
Compared to LSM 2, LSM 1 has a lens cable plugged to the circuit board on the top left corner.
•
Type 2 Lens Shift Module (LSM 2)
•
On LSM 2, the boresight plate is secured with four screws.
LSM1 LSM2
