Pairing your BT remote control with the projector
Press the [HOME] and [BACK] buttons simultaneously for 2 seconds. The status LED on the BT remote
control will flash, indicating the device is in pairing mode.
The pairing process will take approximately 20 seconds. If the pairing is successful, the status LED on the
BT remote control will turn solid blue. Otherwise, the status LED on the BT remote control will turn solid
red. If the BT remote control is left idle for 10 minutes, it will automatically enter Sleep mode and the
Bluetooth is disconnected.
Note:
.
The actual remote control may vary depending on the region.
.
Some keys may have no function for models that do not support these features.
.
Before using the remote control for the first time, remove the transparent insulation tape..
Summary of Contents for BT16063
Page 2: ...INTRODUCTION IR Remote control...
Page 3: ...INTRODUCTION BT Remote control...
Page 4: ...INTRODUCTION...