Function Button
7
Frequency Display
The two options for frequency display are Channel or Measured. The channel frequency will be the
actual channel that the transmitter is on and a measurement may look something like this 454.1250.
The Measured frequency will be the actual frequency that is coming from the transmitter and a mea-
surement may look something like this 454.1248.
Interface Type
Switch between CI-5 Command and Reaction Tune. CI-5 is used when interfacing to a PC for mem-
ory download and datalogging. Reaction Tune is used when interfacing to compatible receivers.
Receiver Type
CI5 for ICOM, and Optoelectronics receivers, AR8000 for AOR receivers and PCR1000.
PCR1000 Volume
When interfaced to an ICOM PCR1000 in Reaction Tune mode you may control the volume of the
receiver by pressing the UP/DOWN arrow buttons.
PCR1000 Squelch
When interfaced to an ICOM PCR1000 in Reaction Tune mode you may control the squelch level of
the receiver by pressing the UP/DOWN arrow buttons.
Beeper
Pressing the UP/DOWN arrow buttons will Enable or Disable the beeper. Each time a signal is
detected the Digital Scout will beep once.
Vibrator
Pressing the UP/DOWN arrow buttons will Enable or Disable the vibrator. Each time a signal is
detected the Digital Scout will vibrate for two seconds.
Note: If both the Vibrator and the Beeper
are Enabled only the Vibrator will function.
