www.optoedu.com Page 9 of 14 [email protected]
window according to your linking
4) Draw out the pole and adjust the focusing knob, and then the image will appear on the computer screen clearly.
5) If no image or the image without color, it may be because the model of the input signal does not match the
output signal of CCD or the model of C-VIDEO/S-VIDEO is not correct. The detail of operation refers to
《
Software operation manual
》
.
4-16 Appear the image on the computer and the Monitor synchronously
1) Do step 4-12 and step 4-14 to connect the computer and the Monitor.
2) Operate step 4-13 and step 4-15, we can make the image appear on the computer and Monitor at the same time.
4-17 Adjust the image
Put the base, stand and digital head correctly, then fix the lock-screw tightly.
Put the object on the base stage.
Observe the object through the eyepiece and adjust the focusing knob to make the image of the object clearly.
Move the digital head or the object gently to adjust the image agreeing with observer.
4-18 Brief instruction for the software
The program design of the software is up to date, and the Chinese/English interface can berth powerful delineation
bar which be used much conveniently and rapidly. You can finish most of analyze work only to click the mouse.
2) Can afford many powerful area choosing tools which can analyse any area your linking at will, such as
adjusting hue and image, dealing with mathematical morphology, image matching, texture analyse, character
identify and so on.
3) Geometry character measuring function, automatically analyzing function such as slightness body, grain body,
line body and so on. The outcome can be kept in data and can be made into chart and so forth.
4-19 Use the white balance
1) The CCD has auto white balance when the white balance switch is on
“
ON
”
.
Please put the switch on “ON” in general. Let the switch be
“
OFF
”
only in
special, for example, observing the red cell, otherwise the color of red cell will be
adjusted into white.
If you want to observe another single color, please let the switch be
“
ON
”
again
when you finish the observation, and put the switch on “OFF” again after auto balance, or the color of the image
will be distortion.(Fig.12)
4-20 Adjust the brightness of the bottom light
1) Turn the adjustable light knob
①
according to the sign marked on
the base, along the clockwise the brightness will be added,
otherwise it will be weakened. (Fig.13)
4-21 Replace the lamps
1) Press the stage on the sunken place then the other side will be lifted. (Fig.14)
2) Take the lamp out of the jack.
