should be wiped with a few xylenes immediately.
5. In order to obtain bright and clear image, the illumination must be
adjusted .When different objective is chosen, you should adjust the iris
diaphragm of the condenser and different brightness of the light.
6. When the lamp needs to replace, you should shut off the power switch and
replace it after the lamp is cool. NOTE: The contact must be firmed, and the
filament center should be adjusted.
A11.1007 Microscope Structure Diaphragm
1-STAND 2- RISE AND FALL SUPPORT 3- ARM 4-BINOCULAR HEAD
5-EYEPIECE 6-NOSEPIECE 7-OBJECTIVE 8-STAGE 9-CONDENSER
V. Maintenance
1. Exam the connection of every component parts is firm when opening the
package and installing the microscope. Be careful, not overexert to break the
instrument.
2. Operate correctly, and put the dust cover on the microscope after work to
prevent from the dust and oil strain.
3.
Don’t dismantle the instrument rashly besides the replaceable lest the correct
