IRSPD 22X IR SPEED DOME
14
Focus Far: Cursor move up
Focus Near: Cursor move down
Iris Open: The values of the item decrease 1, or select another option.
Iris Close: The values of the item increases 1, or select another option, or confirm the
function selected, just like a ENTER key of a PC keyboard.
10. OSD Menu
Enter or exit OSD menu by press 95+PRESE key.
According to PELCO controller to program 95+PRESET, different PELCO control with
different program command.
If using any one of the following Pelco Devices:
CM6700,CM6800
(1) Press key "CAM" after input Camera's number
(2) Input number 95 and press key "PRESET" and keep 2 seconds
(3) In EDIT menu, move cursor to "SET" then press key "ACK", camera main menu will display.
KBD200A/KBD300A/KBD300V(only for direct control)
(1) Press number 95
(2) Press key "PRESET" about 5 seconds until main menu display
CM8500
(1) Press key "CAM" and input Camera's number
(2) Move cursor to "PRESET" on OSD, press button on Joy stick until set tip display
(3) Input 95 and press key "PRESET", the edit words appear, choose ENTER, the main menu display.
CM9500
(1) Press key "CAM" and input camera's number
(2)
Brighten “Setup” on main menu, press key SELECT
(3)
Brighten “Cam” on Setup menu, press key SELECT
(4)
Brighten “Preset” on Cam menu, press key SELECT
(5) Input 95 and press key F1, the main menu display
CM9740/9760
(1)Press key ESCAPE open main menu, select DEF, the detailed menu display
(2)If you are the first time enter this mode, please enter your four number pass-word
(3)Input 95 and select PRESET, the main menu display on Monitor
(4)Select icons QUIT and return default setting menu.
KBD4000/KBD4002/KBD4000V
(1) Press key SPOT MONITOR
(2) Input 95, press key PRESET about 5 seconds until the main menu display on monitor.
PelcoNet
(1) Select SET BOX
(2) Input preset number 95, the main menu will display.
