Optiview Advanced 1080P, User Manual

Page: 83 / 340

Standalone DVR User’s Manual
73
4.2.1 Change Password
For your own safety, please change your administrator default password after your
first login.
After system booted up, you can see the following interface if it is your first login or you
have restored default setup. See Figure 4-1. Please input old password and then input
new password twice to confirm the change.

The default administrator user name is admin and the password is admin .

You can set security questions here to reset the password in case you forgot. System
supports customized setup. Please note you need to set two security questions at the
same time. When you reset the password, you need to answer these two security
questions too.

For reset information, please refer to chapter 4.2.2.
Figure 4-1
Click Cancel button, system pops up the following interface for you to confirm. See Figure
4-2.
Check the box here, system will not pop up the change password interface the next time.