background image

3

Optiquest

Q191wb

ENGLISH

Declaration of RoHS Compliance

This product has been designed and manufactured in compliance with Directive 2002/95/EC of
the European Parliament and the Council on restriction of the use of certain hazardous
substances in electrical and electronic equipment (RoHS Directive) and is deemed to comply
with the maximum concentration values issued by the European Technical Adaptation
Committee (TAC) as shown below: 

Certain components of products as stated above are exempted under the Annex of the RoHS
Directives as noted below:
Examples of exempted components are:

1.

Mercury in compact fluorescent lamps not exceeding 5 mg per lamp and in other lamps not 

specifically mentioned in the Annex of RoHS Directive.

2.

Lead in glass of cathode ray tubes, electronic components, fluorescent tubes, and electronic 

ceramic parts (e.g. piezoelectronic devices).

3.

Lead in high temperature type solders (i.e. lead-based alloys containing 85% by weight or 

more lead).

4.

Lead as an allotting element in steel containing up to 0.35% lead by weight, aluminium 

containing up to 0.4% lead by weight and as a cooper alloy containing up to 4% lead by 
weight.

Substance

Proposed Maximum Concentration

Actual Concentration

Lead (Pb)

0.1%

< 0.1%

Mercury (Hg)

0.1%

< 0.1%

Cadmium (Cd)

0.01%

< 0.01%

Hexavalent Chromium (Cr

6+

)

0.1%

< 0.1%

Polybrominated biphenyls (PBB)

0.1%

< 0.1%

Polybrominated diphenyl ethers (PBDE)

0.1%

< 0.1%

Summary of Contents for Q191wb - 19" LCD Monitor




















Reviews: