OPS70 Simple Install Guide
6
Step 2a
Insert the AMS-QT10 Membrane into the center
head and rotate it to the right 1/4 turn to lock.
Step 2b
Remove the plug from the fitting at the bottom
of the Membrane and insert the end of the
black tubing coming from the lower left part of
the Permeate Pump.
Attention: Warranty will be void if
this step is not performed properly.
Step 3
Insert and lock the CTO-Q10 Cartridge into the
Pre-Filter Head as shown.
NOTE: The pre-filter head has a built-in shut off
valve. When the filter is removed, water will not
flow. When the filter is installed, water will flow
to the system.
v
Install Membrane
v
Install the Pre-Filter
...To Bottom
of Membrane
