User Manual – ePX 200
OptiPro Systems, LLC.
Page 33 of 60
Last Modified: 7/30/2014
7.7
Creating a New Job
Figure 7-9: Startup Screen
Figure 7-9 shows the main screen at startup. The current mode of the machine is indicated in the top
left box. The top right box displays current messages/faults. The left side of the display consists of the
operation buttons, each button will bring up sub menus which will be covered in detail throughout the
following pages. The top left corner of the screen shows the P which indicates this machine is has
polishing software. Double tapping on the P will bring up the sub menu shown in Figure 7-10.
Figure 7-10: P-Series Sub Menu
