Activating Remote Control Battery
1. Remove clear plastic strip from base of remote by pulling
outwards.
Note: Do not press, drop or disassemble the remote control.
Always use new batteries to replace the old set.
Remove the battery when not in use for a long period of
time.
About Remote Control
Point the remote to the infrared receiver located below the screen. (Ensure screen has been
opened)
Turn the unit on by pressing the POWER button on the remote.
Press again to turn off.
Play/ Pause (PLAY)
1. Once the unit has been turned on, press PLAY to play.
2. The NO DISC indicates the disc has been inserted incorrectly, or there is no disc, or the
disc is damaged.
3. When the unit is playing, press PLAY button to pause, press again to continue.
7
