13
GlobeTrotter GT MAX HSUPA
USER GUIDE
USING THE
i
CON CONFIGURATION TOOL
From the main screen you can:
Select the Technology
(current selection is highlighted)
Simply click on the technology desired and the GlobeSurfer
i
CON will switch to it.
Bear in mind that when switching, the GlobeSurfer
i
CON needs to register to the
network again. During this time both LEDs will blink. Wait until one of the LEDs
double blinks again before you try to connect again (see LED Status for more
information on blinking sequences).
Enable / Disable the PIN code
(current selection is highlighted)
Simply click Enabled or Disabled as desired. You will be required to supply your
PIN code. If you enter the wrong PIN Code 3 times you will need to supply the
PUK code (The PUK code window will automatically be displayed).
Change the APN
Replace the old APN and click ‘Save APN’
Connect / Disconnnect
Left click the
i
CON’s icon
and choose Connect (if not connected)
