manualshive.com logo in svg

Option Audio GlobeSurfer X-1, User Manual

Share
Download
Option Audio GlobeSurfer X-1 User Manual Download Page 21

 
GlobeSurfer

®

 X.1 User Guide 

 
 
 

 
Version: v003ext 

Page: 21 of 30 

 

 

Please note that external hard disk drives must be formatted as “FAT” (File Allocation Table) format in order to read 
and write to the disk. NTFS (New Technology File System) format is supported for ‘read’ only, and will not enable you 

to write to the disk. 
It is possible to re-format your external hard drive in FAT32 format through the GlobeSurfer

®

 X.1 device if you require 

read/write functionality. 
 

 

 

Please note: It is highly recommended that external hard drives be separately powered. For external hard drives that 
require power over their USB cable, it is highly recommended that the hard drive be connected to the      

GlobeSurfer

®

 X.1 device while the GlobeSurfer

®

 X.1 is turned off. In the event an external hard drive is connected to 

the GlobeSurfer

®

 X.1 while it is turned on, the sudden power drain on the GlobeSurfer

®

 X.1 device while the external 

hard drive initially powers up, may cause the GlobeSurfer

®

 X.1 to hang. 

 

Summary of Contents for GlobeSurfer X-1































Reviews:

No comments

Brands by name

Popular brands

Load more brands