GETTING STARTED
Positioning GlobeSurfer®II
Position GlobeSurfer®II to ensure the following:
•
A good mobile signal: you may find that placing the unit near a window provides
the best reception.
•
A good wireless signal: centrally located and quite high up, or close to a window to optimise wire-
less connections to computers in both horizontal and vertical directions, allowing wider coverage.
•
The computer or network hub that will be connected to the LAN port is nearby.
•
A power outlet is within easy reach.
•
The GlobeSurfer®II display is in sight, and the buttons and connectors are within easy reach.
•
At least 20 cm away from your person.
•
Out of direct sunlight and away from heat sources, power lines, fluorescent lighting fixtures, and
electrical noise such as radios, transmitters and broadband amplifiers.
•
Water or moisture cannot enter the case of the unit.
Connect your phone
You can use a typical corded or cordless home telephone.
Plug your phone into the phone socket on GlobeSurfer®II and you are ready to make calls through
the mobile network.
To connect a DECT or wireless telephone you must plug the base unit into GlobeSurfer®II.
You can connect the first telephone outlet into GlobeSurfer®II and thus connect all home tel
ephones through GlobeSurfer®II to your mobile network.
Note
: You cannot connect a mobile phone to GlobeSurfer®II.
8
Z06.138_GSII_Man_E.indd 8
22-09-2006 17:06:49
