5
To connect the transmitter to your au-
dio source’s audio output jacks, insert
the transmitter’s built-in
1
/
8
-inch plug
into the supplied Y-type phono plug
adapter, then connect the red plug to
the audio source’s right audio output
jack and connect the white plug to the
left audio output jack.
CONNECTING THE
TRANSMITTER TO
POWER
To power the transmitter, insert the
supplied AC adapter’s barrel plug into
the
19V 200mA
jack on the back of the
transmitter. Then plug the adapter’s
other end into a standard AC outlet.
Cautions:
• Do not leave the adapter plugged
into the AC outlet when the barrel
plug is not plugged into the trans-
mitter.
• The supplied AC adapter supplies
19 volts and delivers at least 200
milliamps. Its center tip is set to
negative and its plug correctly fits
the transmitter’s
19V 200mA
jack.
Using an adapter that does not
meet these specifications could
damage the transmitter or the
adapter.
INSTALLING THE
HEADPHONES’
BATTERIES
To power the headphone receiver, fol-
low these steps to install the two sup-
plied AAA nickel-cadmium batteries,
one in each earpiece.
1. Remove each battery compart-
ment cover by pushing in the tab
and pulling up the cover in the
direction of the arrow.
Illust.
showing
connection
of 1/8-inch
plug to
Y-type
adapter
Illust.
Illust.
33-1143.fm Page 5 Tuesday, August 10, 1999 10:09 AM