IMPORTANT INSTRUCTIONS:
PLEASE READ AND SAVE THESE IMPORTANT SAFEGUARDS
Thank you for choosing an Optimus heater. To ensure the best performance from your heater, please
read and save the following instructions.
WHEN USING ELECTRICAL APPLIANCES, BASIC PRECUATIONS SHOULD ALWAYS BE
FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK AND INJURY TO PERSON,
INCLUDING THE FOLLOWING:
●
Read all instructions before using this heater.
●
This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. Use grip
handle when provided.
●
Keep combustible materials such as drapes, furniture, pillows, bedding, papers, clothes, and curtains
at least three (3) feet (0.9m) from the front of heater and keep them at least 1 foot (0.3m) the sides
and rear of the heater.
●
Extreme caution is necessary when heater is used by or near children or invalids and whenever the
heater is left operating and unattended.
●
Always unplug heater when not in use.
●
Do not use any heater with a damaged cord or plug or after the heater malfunctions or has been
dropped or damaged in any manner. Return heater to manufacturer for examination, electrical or
mechanical adjustment, or repair. (See Warranty for information).
●
Do not use outdoors.
●
This heater is not to be used in bathrooms, laundry areas or other similar indoor locations. Never
locate heater where it may fall into a bathtub or other water container.
●
Do not run cord under carpeting. Do not cover cord with throw rugs, runners or the like. Arrange cord
away from traffic area where it will not be tripped over.
●
To disconnect heater, turn control to OFF then remove plug from outlet.
●
Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause
electric shock or fire or damage the heater.
●
To prevent possible fire, do not block air intakes or exhaust in any manner. Do not use on soft
surfaces, like a bed, where openings may become blocked.
●
A heater has hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint or
flammable liquids are used or stored.
●
Use this heater only as directed in this manual. Any other use not recommended by the manufacturer
may cause fire, electric shock or injury to persons.
●
Always plug heaters directly into a wall outlet/receptacle. Never use with an extension cord or
relocatable power tap (outlet/power strip).
●
If the heater will not operate: See specific instructions in Safety Feature explained in this manual.
●
This fan is equipped with a polarized alternating current line plug (a plug having one blade wider than
the other). This plug fits into the power outlet only one way. This is a safety feature. If you are unable
to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact an
electrician to replace the obsolete outlet. Do not defeat the safety purpose of polarized plug.
●
Any other servicing should be performed by an authorized service representative.
CLEANING/ MAINTENANCE INSTRUCTIONS:
During Season Care:
●
Before cleaning, be sure to turn off and unplug the heater.
●
Carefully wipe the unit with a soft, damp cloth. Please be very cautious near the motor and
heating elements.
●
Do not immerse the heater in water.
●
Never use gasoline, benzene or thinner. This will damage the surface of the heater.
●
After cleaning, be sure to completely dry the unit with a cloth or towel.
After Season Care:
●
Store heater in a cool and dry location with power cord properly secured.
●
Please store the unit in its original carton or suitable container.
OPERATING INSTRUCTIONS:
Pre-Operating Instructions:
●
Carefully remove your heater from the box (please save the carton for off-season storage).
●
Make sure the unit is in the OFF position before plugging the heater into the outlet.
●
Place heater on a firm level surface.
Operating Instructions:
●
Plug the power cord into a wall outlet(AC 120V/60Hz)
●
Rotate the rotary switch to choose the desired heat setting. 800 Watt setting provides minimum
level heating and 1200 Watt setting provides maximum level heating.
●
Push the OSC button to make the unit oscillate. Push it again to turn off the oscillation. The
oscillation only work when the unit is on.
SAFETY FEATURES:
Automatic Tip-Over Safety Switch:
The Tip-over safety switch is located at bottom of the base. The tip-over safety switch allows the
unit to operate only when the heater is placed on a level surface. If the heater is tipped or tilted
while in operation, it will automatically shut off.
Overheat Alert Light:
This heater includes a visual RED alarm light to warn that parts of the heater are getting excessive
hot. If the alarm light flashes, immediately turn the heater off and inspect for any objects on or
adjacent to the heater that may cause high temperatures. DO NOT OPERATE THE HEATER WITH
THE ALARM LIGHT ON.
SERVICE INSTRUCTIONS:
●
Do NOT attempt to repair or adjust any electrical or mechanical functions on this unit. Doing
so will void the warranty.
●
If you have any questions regarding this unit’s operation or believe any repair is necessary,
please call 1-888-672-5832 to speak with a Customer Service Representative.
●
If you need to exchange the unit, please return it, in its original carton with a sales receipt
enclosed, to the store you purchased it. If you are returning the unit more than 30 days after
the date of purchase, please see the enclosed warranty.
●
If you have any other question or comments, feel free to write us:
Optimus Enterprise, Inc.
2201 E. Winston Road, Unit #J
Anaheim, CA92806
E-mail: [email protected]
