OPERATING INSTRUCTIONS:
SETTING UP
•
Carefully remove your fan from the box (please save the carton for off-season storage).
•
Make sure the unit is in the OFF position before plugging the unit into the outlet.
FUNCTIONS & OPERATION
1.
Plug in the product, the power light will be lit.
2.
: Click this button, fan will turn on. Clicking the button again will turn the unit off.
3.
Speed: Click this button to select speed of : low-high
4.
Swing: Click this button to use swing function. Click it again to stop swing function.
CLEANING
During Season Care:
•
Before cleaning, be sure to turn off and unplug the unit.
•
Keep the fan clean. Carefully wipe the unit with a soft, damp cloth. Please be very cautious
near the motor.
•
DO NOT immerse the fan in water and never allow water to drip into the Motor Housing.
•
Never use gasoline, benzene or thinner. This will damage the surface of the unit.
•
After cleaning, be sure to completely dry the unit with a cloth or towel.
After Season Care:
•
Your fan can be stored in the off-season.
•
Before putting the fan in storage, clean it thoroughly, cover it with a vinyl bag, and store it
in a cool and dry place. We recommend using the original (or appropriately sized) box.
•
MAINTENANCE INSTRUCTIONS:
A loose fit between the AC outlet and plug may cause over heating of the plug. If the plug
over heats, it might cut off the fuse inside the power cord plug.
If your fuse access cover is located on the side of the plug:
•
Grasp plug and remove from the receptacle or other outlet device. Do not yank the
cord to unplug.
•
Select a suitable tool such as a small flat screwdriver or travel scissors.
•
To open the fuse cover. Slide open fuse access cover on top of attachment plug
toward blades. (see fig.1)
•
Carefully remove the fuse by prying it out. (see fig.2)
•
Risk of fire can result by using wrong fuse rating. Replace fuse only with 2.5 Amp,
125 Volt rating.
•
To close the fuse access cover. Slide to close access cover on top of attachment
plug. (see fig.3)
Fig.1 Fig.2 Fig.3
If your fuse access cover is located on the face of the plug:
•
Grasp plug and remove from the receptacle or other outlet device. Do not yank the
cord to unplug.
•
Select a suitable tool such as a small flat
screwdriver or travel scissors.
•
To open the fuse cover. Press the tool
down, and then pry the protection door off
of the face of the plug. (see fig. #1)
•
Continue to remove protection door until
you can access the fuse below. (see fig.
#2)
•
Carefully remove the fuse by prying it out.
•
Risk of fire can result by using wrong fuse
rating. Replace fuse only with 5Amp, 125 Volt rating.
•
To close the Close fuse cover. Push the protection door back onto the face of the
plug and press it securely in place.
SERVICE AND REPAIR:
•
Do not attempt to repair or adjust any electrical or mechanical functions on this
unit. Doing so will void the warranty.
•
If you have any questions regarding this unit’s operation or believe any repair is
necessary, please call 1-888-672-5832 to speak with a Customer Service
Representative. Or e-mail us at [email protected]. E-mail will be easier to
get answer.
•
If you need to exchange the unit, please return it, in its original carton with a sales
receipt enclosed, to the store where you purchased the unit.
•
If you are returning the unit more than 30 days after the date of purchase, please
see the enclosed warranty for return procedure.
•
If you have any other question or comments, feel free to write us:
Optimus Enterprise, Inc.
Customer Service Department
2201 E. Winston Road, Unit #J. Anaheim, CA 92806
E-mail: [email protected]
