7
1. Plug the DC adapter’s 5.5 mm
outer diameter/2.1 mm inner
diameter barrel plug into the
cable so it reads – TIP.
2. Set the DC adapter’s voltage
switch to 9 volts.
3. Connect the DC adapter’s barrel
plug to the
DC 9V
jack on the back
of the keyboard.
4. Plug the DC adapter’s other end
into your vehicle’s cigarette-
lighter socket.
Note: If the keyboard does not oper-
ate when you use the DC adapter,
unplug the cord from the cigarette-
lighter socket and clean any ashes or
debris from the socket. If your key-
board still does not work, check the
fuse in the DC adapter and replace it
if necessary.
CONNECTING
HEADPHONES
To listen to your keyboard without
disturbing others, you can connect an
optional pair of stereo headphones
with a
1
/
4
-inch plug. Your local Ra-
dioShack store sells a wide selection
of headphones.
Insert the headphones’
1
/
4
-inch plug
into the
PHONES/OUTPUT
jack on the
back of the keyboard.
Note: Connecting headphones dis-
connects the keyboard’s built-in
speakers.
Listening Safely
To protect your hearing, follow these
guidelines when you use head-
phones.
• Set the volume to the lowest set-
ting before you begin listening.
After you begin listening, adjust
the volume to a comfortable level.
• Do not listen at extremely high
volume levels. Extended high-
volume listening can lead to per-
manent hearing loss.
• Once you set the volume, do not
increase it. Over time, your ears
adapt to the volume level, so a
volume level that does not cause
discomfort might still damage
your hearing.
42-4036.fm Page 7 Thursday, August 12, 1999 8:20 AM
